CAZ0003 Ultra Clean Nano Coating for Multi Surface
RM0.00
CAZ0003 is a revolutionary dual-layer system developed in collaboration with Triz GmbH KG & Co., Ltd., UK. This advanced coating features a micro-nano structure that delivers unparalleled water and oil repellency. Utilizing cutting-edge SURFMORE nano-modification technology, it creates an invisible air barrier on the substrate surface that prevents liquid intrusion while offering exceptional durability and abrasion resistance.
The two-step process involves applying a base coat followed by a top coat, ensuring a synergistic effect that provides outstanding hydrophobic and oleophobic properties once dried. Ideal for surfaces requiring both high-performance protection and long-lasting wear resistance.
Quantity
TECHNICAL DATA
Key Features:
- Super Hydrophobicity: Water contact angle >170°, rolling angle <5°.
- Super Oleophobicity: Oil contact angle >150°.
- Wide Temperature Range: Performs reliably from -31°C to 150°C.
- Dual-Layer System: Base coat and top coat work together to provide superior protection and performance.
- Abrasion Resistance: Excellent durability for surfaces requiring long-term wear resistance.
Suitable Materials:
- All types of materials
Curing Method
- Room temperature curing: 24 hours
- Heat curing: 30 minutes at 120°C
Suitable For:
- Metals: Steel, aluminum, and other metal materials.
- Non-Metals: Plastics, textiles, leather, wood, footwear.
- Specialized Uses:
- Communication tower antennas and military/civilian radars.
- Anti-icing for power lines.
- Anti-icing coatings for wind turbine blades.
- Anti-contamination coatings for vehicles, including cars, concrete mixers, and construction machinery.
- Concrete countertops.
INSTRUCTIONS OF USE
Application Method
Surface Preparation
- Before spraying, clean the surface to be coated thoroughly, removing any old paint, rust, grease, oxidation, or debris. Ensure the surface is free of rust, grease, dust, and moisture.
- Apply the coating immediately after cleaning to prevent re-contamination.
- Ensure a dust-free environment with proper ventilation or air-suction equipment for optimal coating quality.
Coating Application
Step 1: Base Coat
- Mix thoroughly before use. Apply using an HVLP spray gun (e.g., German SCHUTZE S941) for high-volume, low-pressure application.
- Apply multiple thin, even layers to achieve a dried coating thickness of 10-25 microns.
- Allow 20-30 minutes for the base coat to dry. Use a heat gun or hairdryer to accelerate the drying process if needed.
Step 2: Surface Coat
- Use a separate spray gun for the surface coat, not the same one used for the base coat.
- Apply using an HVLP spray gun (e.g., German SCHUTZE S941), ensuring multiple thin, even layers.
- Achieve a dried coating thickness of 10-25 microns, ensuring full coverage of the base coat.
Step 3: Drying/Curing
- The hydrophobic properties will begin to appear 30 minutes after applying the surface coat. For optimal performance, allow at least 2 hours for curing.
Maintenance and Care
- Dual-Coat System: The ultra-hydrophobic and oleophobic properties are achieved only when both base and surface coats are applied. Once fully cured, the coating effectively resists water-oil mixtures and oil contamination.
- Cleaning: Use low-pressure water sprays to clean the coated surface. Dust and dirt will easily rinse away, leaving the surface dry and clean.
- Avoid Harsh Agents: Detergents, soaps, specific solvents (e.g., xylene, toluene, acetone), or high-pressure water streams may affect the coating’s performance.
- Reapplication: If the surface coat is damaged and loses its hydrophobic/oleophobic properties, reapply the surface coat to restore its performance.
Storage
- Recommended Temperature: 18–32°C
- Shelf Life: 24 months.
Packaging
- Part A: 1, 5, 20 kg per container
- Part B: 1, 5, 20 kg per container
Environmental
- For safety recommendations and transportation rules, please refer to the SDS.