TAZ027 Metal Galv Zinc Diffusion Top Coat Water Based
RM0.00
TCP0027 is a transparent, eco-friendly, water-based nano sealer developed by AZ Nano Tech. Designed for fasteners with inorganic zinc-aluminum coatings, galvanized primers, or DACROMET layers, it offers exceptional metallic aesthetics and significantly enhances the oxidation resistance of coated surfaces. The proprietary nano-particle blend by AZ Nano Tech substantially improves wear resistance and corrosion protection of zinc-aluminum layers.
Quantity
TECHNICAL DATA
Key Features:
- Eco-Friendly Water-Based System: Free from heavy metals, meeting green environmental standards.
- Flexible and Hydrogen Embrittlement-Free: Provides superior adhesion and durability without compromising structural integrity.
- High Hardness and Wear Resistance: Achieves hardness above 4H, ensuring excellent abrasion resistance.
- Outstanding Corrosion Protection: Combined with inorganic zinc-aluminum primers, delivers 800-1000+ hours of neutral salt spray resistance without substrate corrosion.
Applicable Materials
- Inorganic zinc-aluminum primer coatings
- Galvanized primers
- Diffusion-coated zinc layers
- DACROMET coatings
Curing Method
-
Baking Temperature: 160-170°C for 25-30 minutes
Application Scope
- Ideal for corrosion protection on:
- Bolts
- Screws
- Nuts
- Springs
- Clamps
- Stamped parts
INSTRUCTIONS OF USE
Instructions for Use and Precautions
-
Surface Preparation
- Clean the Surface: Ensure all workpieces are free of oil, dirt, and debris for optimal coating adherence.
Application Steps
Dip-Centrifuge Process
- Enclose fasteners with a 60-mesh filter (e.g., galvanized screws, DACROMET-coated, diffusion-zinc coated, or inorganic zinc-aluminum coated items).
- Immerse the fasteners into TAZ0027 solution for 10 seconds.
- Remove and allow excess solution to drain, then place in a centrifuge.
- Adjust centrifuge speed to 260-280 rpm and spin for 10-25 seconds in two cycles:
- Cycle 1: Clockwise
- Cycle 2: Counterclockwise
- Ensure to reposition the fasteners after the first cycle for uniform coating coverage.
Dip-Coating Process
- Fully immerse the fasteners into TAZ0027 solution for 10 seconds.
- Allow the excess solution to drain completely.
- Place coated items in a box oven or tunnel furnace for curing.
Sysmyk® TCP0027 Application Instructions
Surface Preparation
Clean the Surface: Ensure all workpieces are free of oil, dirt, and debris for optimal coating adherence.
Application Steps
3.1 Dip-Centrifuge Process
- Enclose fasteners with a 60-mesh filter (e.g., galvanized screws, DACROMET-coated, diffusion-zinc coated, or inorganic zinc-aluminum coated items).
- Immerse the fasteners into TCP0027 solution for 10 seconds.
- Remove and allow excess solution to drain, then place in a centrifuge.
- Adjust centrifuge speed to 260-280 rpm and spin for 10-25 seconds in two cycles:
- Cycle 1: Clockwise
- Cycle 2: Counterclockwise
- Ensure to reposition the fasteners after the first cycle for uniform coating coverage.
3.2 Dip-Coating Process
- Fully immerse the fasteners into TCP0027 solution for 10 seconds.
- Allow the excess solution to drain completely.
- Place coated items in a box oven or tunnel furnace for curing.
Curing Process
- Baking Temperature: 160-170°C
- Duration: 25-30 minutes
Precautions
- Ventilation Required: Ensure proper ventilation in the workspace when using TAZ0027.
- Clean Surfaces Only: The workpiece surface must be free of contaminants like oil or dirt.
- Use Recommended Diluent: Always dilute TAZ0027 with the XAZ0015 specialty thinner. Failure to use the specified thinner may lead to defects like a whitish residue on the coating.
Usage Cycle
- Shelf Life: 2-3 months from opening. Use as soon as possible to avoid material degradation. Use the product promptly to ensure performance.
Storage
- Recommended Storage Temperature: 18–25°C.
- Usage Period: 3 months.
Environmental
- For safety recommendations and transportation rules, please refer to the SDS.