top of page
AZ Logo.png

YAZ0008 Easy-Clean Nano Coating for Carbon Fiber

SKU YAZ0008
Price

RM0.00

Experience unmatched surface protection with YAZ0008, a cutting-edge UV-curable nano coating developed in collaboration with Triz GmbH KG & Co. Ltd., UK. Designed using advanced nano technology, this single-component coating delivers superior performance and durability for carbon fiber surfaces.

 

Upon curing, the coating combines high hardness and exceptional wear resistance with outstanding hydrophobic and oleophobic properties. It effectively repels oil, dirt, and stains, simplifying cleaning and ensuring a pristine, polished look

Quantity

TECHNICAL DATA

Key Features:

  • Effortless Cleaning: Surface stains and grime are easily wiped away.
  • Chemical Resistance: Superior resistance to acids, alkalis, and various chemicals.
  • High Gloss Finish: Provides exceptional gloss and a full, rich appearance.
  • Enhanced Durability: High hardness and outstanding wear resistance.
  • Hydrophobic & Oleophobic Excellence: Surface tension <24 dynes for superior repellency.
  • Anti-Stain Performance: Low surface energy ensures long-lasting protection.
  • Eco-Friendly UV Curing: Environmentally friendly with high production efficiency.

Suitable Materials:

  • Carbon Fiber

Curing Method:

  • UV Curing

Suitable For:

  • Wear-resistant, scratch-resistant, and easy-to-clean protective treatment for carbon fiber and other advanced fiber products.

INSTRUCTIONS OF USE

Pre-Application Surface Preparation Process

  • Manual Cleaning:

    • Use AZclean™ CLEAR Orange Oil Multi-Purpose Cleaner to manually clean the workpiece. For aluminum materials, replace with a cleaner specifically designed for aluminum.
    • Ensure thorough cleaning without missing any spots, removing adhesive residues, dirt, grease, and other contaminants.

  • Automated Cleaning Line:

    • Process sequence:
      • Hot water wash → Pre-degreasing → Main degreasing → Tap water rinse 1 → Tap water rinse 2 → Tap water rinse 3 → Pure water rinse 1 → Pure water rinse 2 → Pure water rinse 3.
    • Dry the surface with cold air if possible.

  • Surface Test:

    • The cleaned surface should allow water droplets to spread evenly, displaying a hydrophilic state. This indicates the surface is clean and ready for coating.

  • Timely Coating:

    • Apply the coating immediately after cleaning (within 30 minutes) to avoid dust contamination, which can cause hydrophobic behavior and lead to coating defects.

  • Inspection and Retreatment:

    • Inspect sprayed workpieces for defects, mainly caused by improper cleaning. Re-clean and re-treat defective pieces if necessary.

  • Curing Process:

    • Initial baking: Set oven temperature to 80°C (workpiece temperature ~50°C) for 10 minutes.
    • Final baking: Set oven temperature to 270°C (workpiece temperature ~250°C) for 30 minutes.

  • Environmental Requirements:

    • Ensure a dust-free workspace with proper ventilation or air extraction systems to maintain application quality.

  • Technical Manual:

    • For more detailed instructions, refer to the technical manual.

Coating Application

  • Preparation:

    • Stir thoroughly before use. Air spray application is recommended.

  • Spray Gun:

    • Use a specialized LPH-101water-based spray gun （Japan） .
    • Spray pressure: 0.6–0.8 MPa.
    • Spray distance: 15–25 cm.
    • Recommended wet film thickness: 3–5 μm.
    • Dry film thickness: 1–2 μm.

  • Environmental Conditions:

    • Application temperature: 10–30°C.
    • Relative humidity: 45%–75%.

  • Cleanroom Standards:

    • Spray booth cleanliness: ISO Class 7 (particle count <10,000 for particles ≥0.5 μm per cubic foot).
    • Leveling and baking area cleanliness: ISO Class 8 (particle count <100,000 for particles ≥0.5 μm per cubic foot).

Storage

  • Recommended Temperature: 18–25°C
  • Shelf Life: 6 months.

Packaging

  • 20 kg per container

Environmental

  • For safety recommendations and transportation rules, please refer to the SDS.
bottom of page