YAZ0044 Easy-Clean Nano Coating for Kitchen Splashback Panel

Key Features:

• Medium-Temperature Curing: Achieves a film hardness of 9H–10H.
• Effortless Cleaning: Surface stains and grease can be wiped away with ease.
• Chemical Resistance: Exceptional durability against acids and alkalis.
• Detergent Resistance: Compatible with all household cleaning agents.
• Superior Anti-Stain Performance: Offers outstanding anti-stain and wear resistance.
• Hydrophilic and Oleophilic Excellence: Ensures effective cleaning with water alone.
• High-Temperature Resistance: Withstands temperatures up to 600°C.

Suitable Materials:

• Enamel panel

Curing Method:

• Heat Curing

Suitable For:

• Hydrophilic and oleophilic easy-to-clean treatment for enameled panel surfaces.

Pre-Application Surface Preparation Process

• Manual Cleaning:

  • Use AZclean™ CLEAR Orange Oil Multi-Purpose Cleaner to manually clean the workpiece. For aluminum materials, replace with a cleaner specifically designed for aluminum.
  • Ensure thorough cleaning without missing any spots, removing adhesive residues, dirt, grease, and other contaminants.

• Automated Cleaning Line:

  • Process sequence:
    • Hot water wash → Pre-degreasing → Main degreasing → Tap water rinse 1 → Tap water rinse 2 → Tap water rinse 3 → Pure water rinse 1 → Pure water rinse 2 → Pure water rinse 3.
  • Dry the surface with cold air if possible.

• Surface Test:

  • The cleaned surface should allow water droplets to spread evenly, displaying a hydrophilic state. This indicates the surface is clean and ready for coating.

• Timely Coating:

  • Apply the coating immediately after cleaning (within 30 minutes) to avoid dust contamination, which can cause hydrophobic behavior and lead to coating defects.

• Inspection and Retreatment:

  • Inspect sprayed workpieces for defects, mainly caused by improper cleaning. Re-clean and re-treat defective pieces if necessary.

• Curing Process:

  • Initial baking: Set oven temperature to 80°C (workpiece temperature ~50°C) for 10 minutes.
  • Final baking: Set oven temperature to 270°C (workpiece temperature ~250°C) for 30 minutes.

• Environmental Requirements:

  • Ensure a dust-free workspace with proper ventilation or air extraction systems to maintain application quality.

• Technical Manual:

  • For more detailed instructions, refer to the technical manual.

Coating Application

• Preparation:

  • Stir thoroughly before use. Air spray application is recommended.

• Spray Gun:

  • Use a specialized LPH-101water-based spray gun （Japan） .
  • Spray pressure: 0.6–0.8 MPa.
  • Spray distance: 15–25 cm.
  • Recommended wet film thickness: 3–5 μm.
  • Dry film thickness: 1–2 μm.

• Environmental Conditions:

  • Application temperature: 10–30°C.
  • Relative humidity: 45%–75%.

• Cleanroom Standards:

  • Spray booth cleanliness: ISO Class 7 (particle count <10,000 for particles ≥0.5 μm per cubic foot).
  • Leveling and baking area cleanliness: ISO Class 8 (particle count <100,000 for particles ≥0.5 μm per cubic foot).

Storage

• Recommended Temperature: 18–25°C
• Shelf Life: 6 months.

Packaging

• 20 kg per container

Environmental

• For safety recommendations and transportation rules, please refer to the SDS.